gototopgototop
  1. Skip to Menu
  2. Skip to Content
  3. Skip to Footer>

GRP Water Tanks

 

Our GRP tanks are world-class and produces by the latest machinery and equipment which is a compound cut in different sizes from 1000 liters to any size required and at altitudes of up to 4 meters.

Specifications:

1 - tank is made in a manner HOT PRESS under the temperature 180 degrees Celsius and piston force 1000 tons, and this is what distinguishes the tanks, where a blessing that the product is characterized by the following:

  • Non-appearance of filaments fiber manufacturer in the segment and the overlapping of which would lead to full strength and durability of the object in the product.
  • The lack of air pores.

2 - All internal screws and in contact with water in stainless steel 316 and all external screws or galvanized ZINC PLATE.

3 - The possibility of manufacturing GRP tank heat insulator.

4 - Insulators used in the joints between the segments of the EPDM type known to bear high temperature and durable foam or PVC depending on the client's request of a width not less than 6.5 cm.

5 - There is no internal pillars and replaced by pillars of external pillars, which prevents any chance of the presence of rust and ease of cleaning the tank from the inside.

6 - The presence AIR - VENT to balance the pressure inside the tank.
7 – Using C CHANEL PANELS  to  load balancing to install with some pieces so as to prevent water leakage with increased endurance.
8 - Internal columns are made of strong material  to bear the high weights, rather than installed by the body of the reservoir openings.

9 - Internal links to compile and install the pieces upper durability required.

2 - All internal screws and in contact with water in stainless steel 316 and all external screws or galvanized ZINC PLATE.

3 - The possibility of manufacturing GRP tank heat insulator.

4 - Insulators used in the joints between the segments of the EPDM type known to bear high temperature and durable foam or PVC depending on the client's request of a width not less than 6.5 cm.

5 - There is no internal pillars and replaced by pillars of external pillars, which prevents any chance of the presence of rust and ease of cleaning the tank from the inside.

6 - The presence AIR - VENT to balance the pressure inside the tank.

7 – Using C CHANEL PANELS to load balancing to install with some pieces so as to prevent water leakage with increased endurance.

8 - Internal columns are made of strong material to bear the high weights, rather than installed by the body of the reservoir openings.

9 - Internal links to compile and install the pieces upper durability required.

Search